CLI Guide - TP-Link

More documents

Recommendations

Info

TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide Figure 1-8 Connecting to the Switch 5. Type the User name and Password (the factory default value for both of them is admin) and press the Enter button, then you can use the CLI now, which is shown as figure1-9. Figure 1-9 Log in the Switch 1.2 CLI Command Modes The CLI is divided into different command modes: User EXEC Mode, Privileged EXEC Mode, Global Configuration Mode, Interface Configuration Mode and VLAN Database (VLAN Configuration Mode). Interface Configuration Mode can also be divided into Interface Ethernet, Interface link-aggregation and some other modes, which is shown as the following diagram. 8
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide The following table gives detailed information about the Accessing path, Prompt of each mode and how to exit the current mode and access the next mode. Mode Accessing Path Prompt Logout or Access the next mode Primary mode once it is Use the exit command to disconnect the User Mode EXEC connected with the switch. TP-LINK> switch (except that the switch is connected through the Console port). Use the enable command to access Privileged EXEC mode. Use the enable Use the exit command to disconnect the command to enter this switch (except that the switch is Privileged EXEC Mode mode from User EXEC mode. TP-LINK# connected through the Console port). Enter the disable command to return to User EXEC mode. Enter configure command to access Global Configuration mode. Use the configure Use the exit or the end command or command to enter this press Ctrl+Z to return to Privileged Global Configuration Mode mode from Privileged EXEC mode. TP-LINK(config)# EXEC mode. Use the interface type number command to access interface Configuration mode. Use the vlan database to access VLAN Configuration mode. 9
Page 1 and 2: TL-SL3428/TL-SL3452 JetStream L2 Ma
Page 19: TL-SL3428/TL-SL3452 JetStream L2 Ma
Page 39 and 40: switchport voice-vlan mode TL-SL342
Page 55 and 56: user modify type TL-SL3428/TL-SL345
Page 71 and 72:
TL-SL3428/TL-SL3452 JetStream L2 Ma
Page 73 and 74:
Page 75 and 76:
show arp detection statistic TL-SL3
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
logging local flash TL-SL3428/TL-SL
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
idge aging-time TL-SL3428/TL-SL3452
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
ip management-vlan TL-SL3428/TL-SL3
Page 115 and 116:
user-config backup TL-SL3428/TL-SL3
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
snmp view-add TL-SL3428/TL-SL3452 J
Page 185 and 186:
snmp user-add TL-SL3428/TL-SL3452 J
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
show snmp-rmon alarm TL-SL3428/TL-S
Page 201 and 202:
Page 203 and 204:
cluster manage role-change TL-SL342
Page 205 and 206:
show all

CLI Guide - TP-Link

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?