CLI Guide - TP-Link
CLI Guide - TP-Link
CLI Guide - TP-Link
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch <strong>CLI</strong> <strong>Guide</strong><br />
ingress-rate limit.<br />
Syntax<br />
port rate-limit disable ingress<br />
Command Mode<br />
Interface Configuration Mode(interface ethernet / interface range ethernet)<br />
Example<br />
Disable the ingress-rate limit for port5:<br />
<strong>TP</strong>-LINK(config)# interface ethernet 5<br />
<strong>TP</strong>-LINK(config-if)# port rate-limit disable ingress<br />
port rate-limit disable egress<br />
Description<br />
The port rate-limit disable egress command is used to disable the egress-rate<br />
limit.<br />
Syntax<br />
port rate-limit disable egress<br />
Command Mode<br />
Interface Configuration Mode(interface ethernet / interface range ethernet)<br />
Example<br />
Disable the egress-rate limit for port5:<br />
<strong>TP</strong>-LINK(config)# interface ethernet 5<br />
<strong>TP</strong>-LINK(config-if)# port rate-limit disable egress<br />
show interface configuration<br />
Description<br />
The show interface configuration command is used to display the<br />
configurations of an Ethernet port, including Port-status, Bandwidth Control,<br />
Negotiation Mode and Port-description.<br />
Syntax<br />
show interface configuration {ethernet [interface]}<br />
Parameter<br />
interface —— The port selected to display the configurations. By default, the<br />
115