CLI Guide - TP-Link

More documents

Recommendations

Info

TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide Parameter acl-id —— The ID of the ACL selected to display the configuration. Command Mode Any Configuration Mode Example Display the configuration of the MAC ACL whose ID is 20: TP-LINK> show acl config 20 show acl bind Description The show acl bind command is used to display the configuration of Policy bind. Syntax show acl bind Command Mode Any Configuration Mode Example Display the configuration of Policy bind: TP-LINK> show acl bind 146
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide Chapter 25 MSTP Commands MSTP (Multiple Spanning Tree Protocol), compatible with both STP and RSTP and subject to IEEE 802.1s, can disbranch a ring network. STP is to block redundant links and backup links as well as optimize paths. spanning-tree global Description The spanning-tree global command is used to configure STP globally. To return to the default configuration, please use no spanning-tree global command. Syntax spanning-tree global [status {disable | enable}] [mode {stp | rstp | mstp}] [cist cist] [htime hello-time] [mage max-age] [delay forward-delay] [hcount hold-count] [mhop max-hops] no spanning-tree global Parameter status —— Enable/ Disable STP function globally. By default, it is disabled. mode —— STP Version. There are three options, including SRP (Spanning Tree Protocol), RSTP (Rapid Spanning Tree Protocol) and MSTP (Multiple Spanning Tree Protocol). By default, the STP version is STP. cist —— CIST Priority, which must be multiple of 4096 ranging from 0 to 61440. By default, the CIST priority is 32768. CIST Priority is an important criterion on determining the root bridge. In the same condition, the switch with the highest priority will be chosen as the root bridge. The lower value has the higher priority. hello-time —— Hello Time, which is the interval to send BPDU packets, and used to test the links. Hello Time ranges from 1 to10 in seconds and it is 2 by default. Otherwise, 2 * (Hello Time + 1) = Max 147
Page 1 and 2:
TL-SL3428/TL-SL3452 JetStream L2 Ma
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
switchport voice-vlan mode TL-SL342
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
user modify type TL-SL3428/TL-SL345
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
show arp detection statistic TL-SL3
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
logging local flash TL-SL3428/TL-SL
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108: idge aging-time TL-SL3428/TL-SL3452
Page 109 and 110: TL-SL3428/TL-SL3452 JetStream L2 Ma
Page 113 and 114: ip management-vlan TL-SL3428/TL-SL3
Page 115 and 116: user-config backup TL-SL3428/TL-SL3
Page 157: TL-SL3428/TL-SL3452 JetStream L2 Ma
Page 183 and 184: snmp view-add TL-SL3428/TL-SL3452 J
Page 185 and 186: snmp user-add TL-SL3428/TL-SL3452 J
Page 199 and 200: show snmp-rmon alarm TL-SL3428/TL-S
Page 203 and 204: cluster manage role-change TL-SL342
show all

CLI Guide - TP-Link

Create successful ePaper yourself

Delete template?

Save as template?