CLI Guide - TP-Link
CLI Guide - TP-Link
CLI Guide - TP-Link
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch <strong>CLI</strong> <strong>Guide</strong><br />
<strong>TP</strong>-LINK(config)# cluster ntdp status enable interval 20 hop 5 hop-delay<br />
300 port-delay 50<br />
cluster explore<br />
Description<br />
The cluster explore command is used to enable the topology information<br />
collecting function manually.<br />
Syntax<br />
cluster explore<br />
Command Mode<br />
Global Configuration Mode<br />
Example<br />
Enable the topology information collecting function manually:<br />
<strong>TP</strong>-LINK(config)# cluster explore<br />
cluster<br />
Description<br />
The cluster command is used to configure Cluster Port. To disable the cluster<br />
function for the port, please use no cluster command.<br />
Syntax<br />
cluster [ndp { disable | enable }] [ntdp { disable | enable }]<br />
no cluster<br />
Parameter<br />
ndp —— Enable/ Disable NDP function for the port. By default, it is enabled.<br />
ntdp —— Enable/ Disable NTDP function for the port. By default, it is enabled.<br />
Command Mode<br />
Interface Configuration Mode(interface ethernet / interface range ethernet)<br />
Example<br />
Enable NDP and NTDP function for port 5:<br />
<strong>TP</strong>-LINK(config)# interface ethernet 5<br />
<strong>TP</strong>-LINK(config-if)# cluster ndp enable ntdp enable<br />
190
Change language