CLI Guide - TP-Link
CLI Guide - TP-Link
CLI Guide - TP-Link
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch <strong>CLI</strong> <strong>Guide</strong><br />
IP-range will be processed. By default, the option is accept.<br />
filter-addr-id —— The IP-range ID the port will be bound to, in the format of 1-3,<br />
4, 6. Up to 15 IP-Ranges can be bound to one port.<br />
max-group —— The maximum number of multicast groups for the port to join<br />
in. It is used to prevent some ports taking up too much bandwidth.<br />
Command Mode<br />
Interface Configuration Mode(interface ethernet / interface range ethernet)<br />
Example<br />
Enable multicast filtering function for port 5, specify Action Mode as accept,<br />
bound IP-range 2, 3, 4, and specify the maximum number of multicast groups<br />
for port 5 to join in as 128:<br />
<strong>TP</strong>-LINK(config)# interface ethernet 5<br />
<strong>TP</strong>-LINK(config-if)# igmp-snooping filter status enable mode accept addr-id<br />
2-4 maxgroup 128<br />
show igmp-snooping global-config<br />
Description<br />
The show igmp-snooping global-config command is used to display the<br />
global configuration of IGMP.<br />
Syntax<br />
show igmp-snooping global-config<br />
Command Mode<br />
Any Configuration Mode<br />
Example<br />
Display the global configuration of IGMP:<br />
<strong>TP</strong>-LINK> show igmp-snooping global-config<br />
show igmp-snooping port-config<br />
Description<br />
The show igmp-snooping port-config command is used to display the port<br />
configuration of IGMP.<br />
Syntax<br />
165
Change language