CLI Guide - TP-Link
CLI Guide - TP-Link
CLI Guide - TP-Link
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch <strong>CLI</strong> <strong>Guide</strong><br />
<strong>TP</strong>-LINK(config)# interface ethernet 2<br />
<strong>TP</strong>-LINK(config-if)# switchport allowed vlan add 2<br />
switchport pvid<br />
Description<br />
Syntax<br />
Parameter<br />
The switchport pvid command is used to configure the PVID for the switch<br />
ports.<br />
switchport pvid vlan-id<br />
vlan-id —— VLAN ID, ranging from 1 to 4094.<br />
Command Mode<br />
Example<br />
Interface Configuration Mode (interface ethernet / interface range ethernet )<br />
Specify the PVID of port 2 as 2:<br />
<strong>TP</strong>-LINK(config)# interface ethernet 2<br />
<strong>TP</strong>-LINK(config-if)# switchport pvid 2<br />
switchport general egress-rule<br />
Description<br />
Syntax<br />
Parameter<br />
The switchport general egress-rule command is used to configure the<br />
egress-rule of the general port.<br />
switchport general egress-rule vlan-id { untagged | tagged }<br />
vlan-id —— VLAN ID, ranging from 2 to 4094.<br />
untagged | tagged ——egress-rule,untagged or tagged<br />
Command Mode<br />
Example<br />
Interface Configuration Mode ( interface ethernet / interface range ethernet )<br />
Specify the egress-rule of port 2 in vlan 3 as tagged:<br />
19
Change language