CLI Guide - TP-Link

More documents

Recommendations

Info

TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide policy, if the rate beyond 1000kbps, will be discarded by the switch: TP-LINK(config)# acl edit action policy1 120 rate 1000 osd discard acl bind to-port Description The acl bind to-port command is used to bind a policy to a port. To cancel the bind relation, please use no acl bind to-port command. Syntax acl bind to-port {policy-name} {port} no acl bind to-port {policy-name} {port} Parameter policy-name —— The name of the policy desired to bind. port —— The number of the port desired to bind. Command Mode Global Configuration Mode Example Bind policy1 to Port 1: TP-LINK(config)# acl bind to-port policy1 1 acl bind to-vlan Description The acl bind to-vlan command is used to bind a policy to a VLAN. To cancel the bind relation, please use no policy to-vlan command. Syntax acl bind to-vlan {policy-name} {vlan-id} no policy to-vlan {policy-name} {vlan-id} Parameter policy-name —— The name of the policy desired to bind. vlan-id —— The ID of the VLAN desired to bind, ranging from 1 to 4094. Command Mode Global Configuration Mode Example 144
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide Bind policy1 to VLAN 2: TP-LINK(config)# acl bind to-vlan policy1 2 show acl time-segment Description The show acl time-segment command is used to display the configuration of Time-Range. Syntax show acl time-segment Command Mode Any Configuration Mode Example Display the configuration of Time-Range: TP-LINK> show acl time-segment show acl holiday Description The show acl holiday command is used to display the defined holiday. Syntax show acl holiday Command Mode Any Configuration Mode Example Display the defined holiday: TP-LINK> show acl holiday show acl config Description The show acl config command is used to display the configuration of ACL. Syntax show acl config acl-id 145
Page 1 and 2:
TL-SL3428/TL-SL3452 JetStream L2 Ma
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
switchport voice-vlan mode TL-SL342
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
user modify type TL-SL3428/TL-SL345
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
show arp detection statistic TL-SL3
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
logging local flash TL-SL3428/TL-SL
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106: TL-SL3428/TL-SL3452 JetStream L2 Ma
Page 107 and 108: idge aging-time TL-SL3428/TL-SL3452
Page 113 and 114: ip management-vlan TL-SL3428/TL-SL3
Page 115 and 116: user-config backup TL-SL3428/TL-SL3
Page 155: TL-SL3428/TL-SL3452 JetStream L2 Ma
Page 183 and 184: snmp view-add TL-SL3428/TL-SL3452 J
Page 185 and 186: snmp user-add TL-SL3428/TL-SL3452 J
Page 199 and 200: show snmp-rmon alarm TL-SL3428/TL-S
Page 203 and 204: cluster manage role-change TL-SL342
show all

CLI Guide - TP-Link

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?