CLI Guide - TP-Link
CLI Guide - TP-Link
CLI Guide - TP-Link
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch <strong>CLI</strong> <strong>Guide</strong><br />
policy, if the rate beyond 1000kbps, will be discarded by the switch:<br />
<strong>TP</strong>-LINK(config)# acl edit action policy1 120 rate 1000 osd discard<br />
acl bind to-port<br />
Description<br />
The acl bind to-port command is used to bind a policy to a port. To cancel the<br />
bind relation, please use no acl bind to-port command.<br />
Syntax<br />
acl bind to-port {policy-name} {port}<br />
no acl bind to-port {policy-name} {port}<br />
Parameter<br />
policy-name —— The name of the policy desired to bind.<br />
port —— The number of the port desired to bind.<br />
Command Mode<br />
Global Configuration Mode<br />
Example<br />
Bind policy1 to Port 1:<br />
<strong>TP</strong>-LINK(config)# acl bind to-port policy1 1<br />
acl bind to-vlan<br />
Description<br />
The acl bind to-vlan command is used to bind a policy to a VLAN. To cancel<br />
the bind relation, please use no policy to-vlan command.<br />
Syntax<br />
acl bind to-vlan {policy-name} {vlan-id}<br />
no policy to-vlan {policy-name} {vlan-id}<br />
Parameter<br />
policy-name —— The name of the policy desired to bind.<br />
vlan-id —— The ID of the VLAN desired to bind, ranging from 1 to 4094.<br />
Command Mode<br />
Global Configuration Mode<br />
Example<br />
144