ABB i-Bus® EIB/KNX ABB Powernet EIB/KNX

ABB i-bus ® EIB/KNX
ABB Powernet EIB/KNX
LEANtouch (monochrome),
SMARTtouch (monochrome, colour)
Type: 6x36/30M…, 6x36/100x…, 6x36/100CB…
Changing system settings directly on
the LEANtouch/SMARTtouch panel
display
Start page
Up to 21 pages with 5, 8 or 10 operator
elements, touch surfaces or symbols
can be created in the panel. The
first page is set by default as the start
page i.e. the first page is the page
from which further pages can be accessed.
This is carried out via hyperlink
functions (see also hyperlink
functions under the functional description
of touch surfaces). Each of the 21
other pages can be declared as a
start page via the setting “Use as start
page”.
Macro recorder
Via the macro function of the panel, it
is possible to store several functions
(up to 20) which can be retrieved via
the panel.
To do so, at least one touch surface
must be assigned the function “Macro
retrieval”. The communication object
“Macro number” of the touch surface
is linked via an internal address to the
“Macro actuator” communication object.
In addition, an external group
address can be linked to the 1-byte
communication object “Macro actuator”
so that a macro function can also
be retrieved by a switch sensor. Up to
32 different macros can be stored in
the panel.
Example:
A user always switches the background
brightness on when entering
the house and sets the comfort mode
to regulate the room temperature. Normally,
he has to click through several
pages to do so. Via the macro
function, the user is able to retrieve
these functions, which he always re-
May 2006 19