ABB i-Bus® EIB/KNX ABB Powernet EIB/KNX
ABB i-Bus® EIB/KNX ABB Powernet EIB/KNX
ABB i-Bus® EIB/KNX ABB Powernet EIB/KNX
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ABB</strong> i-bus ® <strong>EIB</strong>/<strong>KNX</strong><br />
<strong>ABB</strong> <strong>Powernet</strong> <strong>EIB</strong>/<strong>KNX</strong><br />
LEANtouch (monochrome),<br />
SMARTtouch (monochrome, colour)<br />
Type: 6x36/30M…, 6x36/100x…, 6x36/100CB…<br />
Parameters: “Push button” touch<br />
surface<br />
The default setting for the values<br />
is printed in bold type.<br />
– Name of button <br />
– Operation Direct<br />
Via pop-up with single button<br />
operation<br />
– Number of objects 1 / 2<br />
– Object type 1 bit<br />
1 byte (0…255)<br />
1 byte (0%…100%)<br />
Only for 1 bit and 1 object:<br />
– Behaviour send OFF on rising edge<br />
send OFF on falling edge<br />
send OFF for both edges<br />
send ON on falling edge<br />
send OFF on rising edge, send ON on<br />
falling edge<br />
send ON on rising edge<br />
send ON on rising edge, send OFF on<br />
falling edge<br />
send ON for both edges<br />
send TOGGLE on rising edge<br />
send TOGGLE on falling edge<br />
Only for 1 bit and 2 objects:<br />
– Behaviour send OFF on rising edge (object 1),<br />
send ON on falling edge (object 2)<br />
send OFF on rising edge, send ON on<br />
falling edge (objects 1 and 2)<br />
send ON on rising edge (object 1),<br />
send OFF on falling edge (object 2)<br />
send ON for both edges (objects<br />
1 and 2)<br />
Only for 1 byte (0…255) and 1 object:<br />
– Value 1 0<br />
– Behaviour send value 1 on rising edge<br />
send value 1 on falling edge<br />
send value 1 for both edges<br />
Only for 1 byte (0…255) and 2 objects:<br />
– Value 1 0<br />
– Value 2 255<br />
– Behaviour send value 1 (object 1) on rising<br />
edge, send value 2 (object 2) on<br />
falling edge<br />
send value 2 (object 2) on rising<br />
edge, send value 1 (object 1) on<br />
falling edge<br />
Only for 1 byte (0%…100%) and 1 object:<br />
– Value 1 0%<br />
– Behaviour send value 1 on rising edge<br />
send value 1 on falling edge<br />
send value 1 for both edges<br />
Only for 1 byte (0%…100%) and 2 objects:<br />
– Value 1 0%<br />
– Value 2 100%<br />
– Behaviour send value 1 (object 1) on rising<br />
edge, send value 2 (object 2) on<br />
falling edge<br />
send value 2 (object 2) on rising<br />
edge, send value 1 (object 1) on<br />
falling edge<br />
May 2006 41
Change language