ABB i-Bus® EIB/KNX ABB Powernet EIB/KNX

ABB i-bus ® EIB/KNX
ABB Powernet EIB/KNX
LEANtouch (monochrome),
SMARTtouch (monochrome, colour)
Type: 6x36/30M…, 6x36/100x…, 6x36/100CB…
Parameters for left touch surface
The default setting for the values
is printed in bold type.
– Name of touch surface
– Jump to page Page 1 / Page 2 / … / Page 21 /
System / Extras / Alarm control unit /
Alarm messages
Parameters for right touch surface
The default setting for the values
is printed in bold type.
– Name of touch surface
– Jump to page Page 1 / Page 2 / … / Page 21 /
System / Extras / Alarm control unit /
Alarm messages
Parameters for signalling function
The default setting for the values
is printed in bold type.
General:
– Code for arming/disarming 0000
(0000…9999)
– Code for silent alarm 0000
(0000…9999)
– Overwrite code at download No / Yes
– Number of entry doors None (internal monitoring)
1
2
3
– Type of arming/disarming Internal lock/PIN code/
push button
Block lock
External lock/PIN code/
transponder
Bolt switch contact
– Monitoring time of inputs 1 min / 3 min / 5 min / 10 min / 20 min /
30 min
– Number of inputs 8
(1…30)
– Monitoring of inputs after 20 s / 30 s / 1 min / 5 min / 10 min
mains voltage recovery
– Time delay at arming None / 10 s / 15 s / 20 s / 25 s / 30 s /
35 s / 40 s / 1 min
– Time delay as long as None / 10 s / 15 s / 20 s / 25 s / 30 s /
alarm release
35 s / 40 s / 1 min
– Time of the external audio signal 1 min / 2 min / 3 min
– Activate arming via object No / Yes
– Armed status flashing No / Yes
– Delete failure message at No / Yes
external display
– Type of output 1 Byte / 14 Byte
Input parameters
The default setting for the parameters
is printed in bold type.
Separate for each input:
– Type of input … Window
Watch dog sensor
Watch dog sensor in the entry area
Door (not in the entry area)
Entry door 1
Entry door 2
Entry door 3
– Description of the input
– Text for on
– Text for failure
– Message text at releasing
(max. 13 characters)
– Message text at failure
(max. 13 characters)
– Cyclical monitoring of the inputs Inactive
Active
May 2006 29