ABB i-Bus® EIB/KNX ABB Powernet EIB/KNX

ABB i-bus ® EIB/KNX
ABB Powernet EIB/KNX
LEANtouch (monochrome),
SMARTtouch (monochrome, colour)
Type: 6x36/30M…, 6x36/100x…, 6x36/100CB…
Parameters: “2-byte counter” touch
surface
The default setting for the values
is printed in bold type.
– Name of button
– Display type without leading sign
with leading sign
– Display switching status Count value
Parameters: “4-byte counter” touch
surface
The default setting for the values
is printed in bold type.
– Name of button
– Display type without leading sign
with leading sign
– Display switching status Count value
Parameters: “1-byte counter” touch
surface
The default setting for the values
is printed in bold type.
– Name of button
– Display type without leading sign
with leading sign
– Display switching status Count value
Parameters: “Text” touch surface
The default setting for the values
is printed in bold type.
– Name of button
–Text
Only for “show and send”:
– Message text Text
(max. 13 characters)
show only
show and send
Parameters: “Hyperlink” touch surface
The default setting for the values
is printed in bold type.
– Name of button
– Jump to page Page 1 / Page 2 / … / Page 21 /
System / Extras / Alarm control unit /
Alarm messages
– Display switching status No / Yes
Only if “yes” is selected:
Status display
Only if “Text” is selected:
Text for On
Text for Off
Text
Symbol
User-defined symbol
On
Off
May 2006 51