ABB i-Bus® EIB/KNX ABB Powernet EIB/KNX
ABB i-Bus® EIB/KNX ABB Powernet EIB/KNX
ABB i-Bus® EIB/KNX ABB Powernet EIB/KNX
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ABB</strong> i-bus ® <strong>EIB</strong>/<strong>KNX</strong><br />
<strong>ABB</strong> <strong>Powernet</strong> <strong>EIB</strong>/<strong>KNX</strong><br />
LEANtouch (monochrome),<br />
SMARTtouch (monochrome, colour)<br />
Type: 6x36/30M…, 6x36/100x…, 6x36/100CB…<br />
Parameters: Temperature comparator<br />
1I1O (1 input 1 output)<br />
The default setting for the values<br />
is printed in bold type.<br />
General:<br />
– Comparative value (in °C) 18<br />
– Hysteresis 1.5<br />
– Object type of the output 1 Bit / 1 Byte<br />
– Telegram will be sent at Input is greater than comparative value<br />
Input is less than comparative value<br />
Output changing<br />
Only for 1 bit:<br />
– It will be sent if OFF telegram<br />
Input > Comparative value<br />
ON telegram<br />
– It will be sent if OFF telegram<br />
Input > Comparative value<br />
ON telegram<br />
Only for 1 byte:<br />
– It will be sent if 0<br />
Input > Comparative value<br />
– It will be sent if 255<br />
Input > Comparative value<br />
– Send output cycle No / Yes<br />
Only if “Yes” is selected:<br />
– Cycle time (mm:ss) 09:59<br />
Parameters: Temperature comparator<br />
2I1O (2 inputs 1 output)<br />
The default setting for the values<br />
is printed in bold type.<br />
General:<br />
– Object type of the output 1 Bit / 1 Byte<br />
– Telegram will be sent at Input 1 is greater than input 2<br />
Input 1 is less than input 2<br />
Output changing<br />
Only for 1 bit:<br />
– It will be sent if OFF telegram<br />
Input 1 > Input 2<br />
ON telegram<br />
– It will be sent if OFF telegram<br />
Input 1 < Input 2<br />
ON telegram<br />
Only for 1 byte:<br />
– It will be sent if 0<br />
Input 1 > Input 2<br />
– It will be sent if 255<br />
Input 1 < Input 2<br />
– Send output cycle No / Yes<br />
Only if “Yes” is selected:<br />
– Cycle time (mm:ss) 09:59<br />
May 2006 87