ABB i-Bus® EIB/KNX ABB Powernet EIB/KNX

ABB i-bus ® EIB/KNX
ABB Powernet EIB/KNX
LEANtouch (monochrome),
SMARTtouch (monochrome, colour)
Type: 6x36/30M…, 6x36/100x…, 6x36/100CB…
Parameters: “Macro” touch surface
The default setting for the values
is printed in bold type.
– Name of button
– Save macro via long push button Possible
action
– Display switching status Text
Symbol
User-defined symbol
Only if “Text” is selected:
– Text if macro is active Active
Only if “Symbol” is selectedl:
(see below)
– External retrieval via 1 byte
– Macro number 1 / 2 / 3 / … / 31 / 32
Symbols for status display if macro is active:
Parameters: “1-byte value” touch
surface
The default setting for the values
is printed in bold type.
– Name of button
– Display type Brightness
Wetness
Volume
Value
Temperature offset (-5K…+5K)
Current
Wind direction
free scalable
Only for brightness, volume and value:
– Value show only
show and send
– Range of values 0% to 100%
0 to 255
Only for “show and send”:
– Button description Text
Symbol
Only if “Text” is selected:
– Text for value increasing On
– Text for value lowering Off
Only if “Symbol” is selected:
(see below)
Only for wetness:
– Value show only
– Range of values 0% to 100%
0 to 255
Only for temperature offset:
– Value show and send
– Range of values -5K to +5K
– Button description Text
Symbol
Only if “Text” is selected:
– Text for value increasing On
– Text for value lowering Off
Only if “Symbol” is selected:
(see below)
May 2006 47