ABB i-Bus® EIB/KNX ABB Powernet EIB/KNX

ABB i-bus ® EIB/KNX
ABB Powernet EIB/KNX
LEANtouch (monochrome),
SMARTtouch (monochrome, colour)
Type: 6x36/30M…, 6x36/100x…, 6x36/100CB…
Parameters: Status converter
The default setting for the values
is printed in bold type.
– Type of input 1 bit
1 byte
Only for 1 bit:
– Number of inputs 1 / 2 / 3 / 4
(Following parameters only for 2 inputs)
– Output (14 bytes) for input value Inactive
I2, I1=00 Active
Only if “Active” is selected:
– Output text (14 bytes) for
input value I2, I1=00
– Output (14 bytes) for input value Inactive
I2, I1=00 Active
Only if “Active” is selected:
– Output text (14 bytes) for
input value I2, I1=00
…
– Output (14 bytes) for input value Inactive
I2, I1=00 Active
Only if “Active” is selected:
– Output text (14 bytes) for
input value I2, I1=00
Only for 1 byte:
– Number of input/output values 1 / 2 / 3 / 4 / … / 15 / 16
(Following parameters only for 3 input/output values)
– Input value 1 0
– Output text (14 bytes) for
input value 0
– Input value 2 0
– Output text (14 bytes) for
input value 1
– Input value 3 0
– Output text (14 bytes) for
input value 2
88 May 2006