Download RoboCylinder Servo RCS Controller ... - pulsar.com.tr
Download RoboCylinder Servo RCS Controller ... - pulsar.com.tr
Download RoboCylinder Servo RCS Controller ... - pulsar.com.tr
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<s<strong>tr</strong>ong>RCS</s<strong>tr</strong>ong> Series<br />
<s<strong>tr</strong>ong>RCS</s<strong>tr</strong>ong> Actuator Check Points<br />
Speed<br />
Speeds from 1mm/sec to maximum for each position. For types with long s<strong>tr</strong>okes, the maximum speed will decrease<br />
at longer lengths. Please check the specifications of each machine type.<br />
S<strong>tr</strong>oke<br />
SS/SSR, SM/SMR are available in 100mm increments and the rest are set in 50mm increments.<br />
Please be cautious of intereference with peripheral devices.<br />
Positioning<br />
Repeatability<br />
The positioning repeatability is approximately ±0.02mm ~ ±0.05mm.<br />
Payload<br />
Please make sure that the payload does not exceed specification value. The payload displayed value is<br />
the value set in each machine type according to the acceleration and weight requirements.<br />
Be sure to check your moment load requirments and keep them within the range of allowable value of<br />
Ma, Mb and Mc. The standard Rod Type can no be used with radial load on the rod.<br />
Use either the type with guide, or attach an external guide.<br />
Load Moment<br />
Slider Type Load Moment Direction<br />
MA<br />
MB<br />
MC<br />
Static<br />
Running<br />
Torque<br />
Capacity<br />
Please do not apply rotational moment over 0.5N · m to the Rod Type rod.<br />
Rotating guide may break or deform.<br />
Static Running<br />
Torque Capacity<br />
Under 0.5N · m<br />
Overhang Load<br />
Length<br />
If overhang specifications are exceeded, oscillation and binding may occur. Therefore,<br />
please use within allowable specifications.<br />
P.9