Timken Super Precision Bearings for Machine Tool Applications

Ball Bearings
WN CONSTRUCTION
• Incorporates low shoulder on non-thrust side of both inner and
outer rings.
• Balls separated by one-piece cage piloted against a ground
thrust shoulder land of the outer ring.
HIGH-SPEED SEAL OPTION
Available with non-contact seals. Add VV suffix to part number
(in place of CR cage designation). Ex: 2MMV9106HXVV SUL.
2
Max. Min. Max. Min. Max. Min. Loose Tight Max. Min. Tight Loose Max. Min. Loose Loose
Suggested Shoulder Diameters Shaft Diameter Mounting Fits
Housing Bore
Housing Bore
Mounting Fits
Shaft
Housing
(Stationary)
(Stationary)
r
Rad. (2) Mounting Fits
mm/in. mm/in. mm/in. mm/in. mm/in. mm/in. mm/in. mm/in. mm/in.
1.0 102.8 102.0 123.5 122.7 95.005 94.995 0.005 0.013 130.009 130.000 0.000 0.018 130.020 130.010 0.029 0.010
0.039 4.05 4.02 4.86 4.83 3.74040 3.74000 0.00020 0.00050 5.11850 5.11810 0.00000 0.00070 5.11890 5.11850 0.00110 0.00040
1.0 110.3 109.5 131.0 130.2 100.005 99.995 0.005 0.013 140.009 140.000 0.000 0.018 140.020 140.010 0.029 0.010
0.039 4.34 4.31 5.16 5.13 3.93720 3.93680 0.00020 0.00050 5.51220 5.51180 0.00000 0.00070 5.51260 5.51220 0.00110 0.00040
1.0 120.3 119.5 141.0 140.2 110.005 109.995 0.005 0.013 150.009 150.000 0.000 0.018 150.023 150.012 0.032 0.012
0.039 4.74 4.71 5.55 5.52 4.33090 4.33050 0.00020 0.00050 5.90590 5.90550 0.00000 0.00070 5.90640 5.90600 0.00120 0.00050
1.0 131.2 130.4 155.0 154.3 120.005 119.995 0.005 0.013 165.010 165.000 0.000 0.020 165.022 165.012 0.032 0.012
0.039 5.16 5.13 6.10 6.07 4.72460 4.72420 0.00020 0.00050 6.49650 6.49610 0.00000 0.00080 6.49700 6.49660 0.00130 0.00050
1.5 142.1 141.4 169.2 168.4 130.005 129.995 0.005 0.015 180.010 180.000 0.000 0.020 180.022 180.012 0.032 0.012
0.059 5.60 5.57 6.66 6.63 5.11830 5.11790 0.00020 0.00060 7.08700 7.08660 0.00000 0.00080 7.08750 7.08710 0.00130 0.00050
1.5 152.1 151.4 179.2 178.4 140.005 139.995 0.005 0.015 190.010 190.000 0.000 0.021 190.022 190.012 0.033 0.012
0.059 5.99 5.96 7.05 7.02 5.51200 5.51160 0.00020 0.00060 7.48070 7.48030 0.00000 0.00080 7.48120 7.48080 0.00140 0.00050
2.0 163.1 162.4 198.2 197.4 150.005 149.995 0.005 0.015 210.011 210.000 0.000 0.022 210.025 210.015 0.036 0.015
0.079 6.42 6.39 7.80 7.77 5.90570 5.90530 0.00020 0.00060 8.26820 8.26770 0.00000 0.00090 8.26870 8.26830 0.00150 0.00060
FIXED
FLOATING
C
TIMKEN MACHINE TOOL CATALOG 153