Timken Super Precision Bearings for Machine Tool Applications

SUPER PRECISION BEARING MODEL REQUEST FORM
Appendix
When requesting assistance, use of this form provides your Timken sales representative with a better understanding of your specific needs.
General Information
Requester: _______________________________________ Customer: ____________________________________
Country: _________________________________________ Customer country: _____________________________
Application/type of machine:_______________________________________
Bearing Information
Type of bearings (check all that apply):
Angular contact Radial ball Tapered roller bearing To be determined
Quantity of bearings in system: _______ (if applicable)
Bearing mounting (check all that apply): Only/front: Rear (optional):
AD
Bearing part number(s)/location or New bearing:
(i.e. work end or drive end):
Shaft size(s): ________________________
________________________
Housing size(s): ________________________
________________________
Width size(s): ________________________
________________________
(specific size(s) or range)
Bearing mounting configuration: (please attach drawing or sketch with bearing positions and load positions OR with
tool as position “0,” provide distance to each bearing, including which bearing is fixed and which is float, if applicable
– also, describe contact angle orientation.)
Application Information
Speed: _________(rpm)
Lubrication method/name: ________________________
A
All fixed or with rear floating Rotation: Inner ring Outer ring
Temperature: Ambient temperature or Shaft ________________________
Housing ________________________
Bearing ________________________
Sump (if applicable) ________________________
TIMKEN MACHINE TOOL CATALOG 247