Alternative Reader Wiring Guide - Best Access Systems
Alternative Reader Wiring Guide - Best Access Systems
Alternative Reader Wiring Guide - Best Access Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Alternative</strong> <strong>Reader</strong> <strong>Wiring</strong> <strong>Guide</strong><br />
21. Nedap <strong>Reader</strong>s<br />
This particular reader is used namely for asset/cardholder tracking. It can track objects up to 38 feet from the<br />
receiver.<br />
21.1. Nedap Transit <strong>Reader</strong>s<br />
The Nedap Transit reader operates at 24 VDC ± 10% 500 mA.<br />
21.1.1 <strong>Wiring</strong> the BAS-1300<br />
25-pin Female<br />
DB-25 Connector<br />
Comm Board<br />
Single <strong>Reader</strong><br />
Interface Module<br />
GND<br />
BZR<br />
LED<br />
CLK/D1<br />
DATA/D0<br />
VO<br />
GND<br />
0-2<br />
0-3<br />
Tie to Earth<br />
Ground<br />
This connection is<br />
placed when the<br />
Door Contact is not<br />
used<br />
TYPICAL SOFTWARE SETTINGS<br />
1. <strong>Reader</strong> Type = WIEGAND/PROX<br />
2. Keypad = NO KEYPAD<br />
3. LED Mode = 1 or 2-WIRE LED CONTROL<br />
PS 270 Board<br />
revision 7 — 109