Alternative Reader Wiring Guide - Best Access Systems
Alternative Reader Wiring Guide - Best Access Systems
Alternative Reader Wiring Guide - Best Access Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HID <strong>Reader</strong>s<br />
13.5.2 <strong>Wiring</strong> the BAS-1320<br />
READER 1<br />
Dual <strong>Reader</strong><br />
Interface Module<br />
VO<br />
LED<br />
BZR<br />
D1/CLK<br />
D0/DATA<br />
GND<br />
VO<br />
Red - 5-12 VDC<br />
Violet - Green LED<br />
Brown - Red LED<br />
White - Data 1<br />
Green - Data 0<br />
Black - Ground<br />
Blue - not used<br />
Yellow - not used<br />
TYPICAL SOFTWARE SETTINGS<br />
1. 2-Wire LED Support<br />
2. No keypad<br />
3. Wiegand/Prox data type<br />
* Use unregulated mode for the 1320, Jumper J2<br />
HID Classic Swipe <strong>Reader</strong>, EPIC Swipe<br />
<strong>Reader</strong>, or Pinpad Wiegand <strong>Reader</strong><br />
READER 2<br />
LED<br />
BZR<br />
D1/CLK<br />
Orange - not<br />
used<br />
D0/DATA<br />
GND<br />
64 — revision 7