Alternative Reader Wiring Guide - Best Access Systems
Alternative Reader Wiring Guide - Best Access Systems
Alternative Reader Wiring Guide - Best Access Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Alternative</strong> <strong>Reader</strong> <strong>Wiring</strong> <strong>Guide</strong><br />
13.7. ProxPro II<br />
The ProxPro II reader (model number 5455BBn00) operates at 5-16 VDC. The average current draw at 12<br />
VDC is 30 mA. The LEDs and buzzer function in the same way as standard HID Wiegand/proximity<br />
readers.<br />
13.7.1 <strong>Wiring</strong> the BAS-1300<br />
TYPICAL SOFTWARE SETTINGS<br />
1. <strong>Reader</strong> Type = WIEGAND/PROX<br />
2. Keypad = NO KEYPAD<br />
3. LED Mode = 1-WIRE LED CONTROL<br />
HID<br />
Single <strong>Reader</strong><br />
Inteface Module<br />
GND<br />
BZR<br />
LED<br />
CLK/D1<br />
DATA/D0<br />
VO<br />
Black<br />
Yellow<br />
Orange<br />
White<br />
Green<br />
Red<br />
Drain<br />
wire &<br />
Shield<br />
to<br />
Ground<br />
revision 7 — 67