Alternative Reader Wiring Guide - Best Access Systems

More documents

Recommendations

Info

AWID Readers 2.4. AWID Sentinel-Prox (LR-911) The LR-911 requires an alternate power source of 5-15 VDC and has a current requirement of 1.5A. There are no LED's on the reader (optional). The reader has a read range of up to 11 feet. See diagram below for proper wiring and setup. Up to 11' from reader * The LR-911 feature a cone shaped read zone. The optimal read zone is a circular cone that is at a 45 degree angle from the edges of the reader and extends out to 11 feet away from the center of the reader. Cards can be read accurately if presented to the reader within this range. 2.4.1 Wiring the BAS-1300 TYPICAL SOFTWARE SETTINGS 1. Reader Type = WIEGAND/PROX 2. Keypad = NO KEYPAD 3. LED Mode = No-LED Control AWID Single Reader Interface Module Blue GND 12v GND Power Supply White Red Black Green Yellow *Allows LR-911 Read Cylcling BZR LED CLK/D1 DATA/D0 VO 16 — revision 7
Alternative Reader Wiring Guide 2.4.2 Wiring the BAS-1320 TYPICAL SOFTWARE SETTINGS 1. Reader Type = WIEGAND/PROX 2. Keypad = NO KEYPAD 3. LED Mode = No-LED Control Dual Reader Interface Module AWID VO LED Green White BZR CLK/D1 DATA/D0 Reader 1 Blue GND 12v GND Power Supply Red Black Yellow *Allows LR-911 Read Cylcling revision 7 — 17
Page 3 and 4: Alternative Reader Wiring Guide Tab
Page 5 and 6: Alternative Reader Wiring Guide 124
Page 7: ACCESS READERS
Page 10 and 11: AIT Readers 1.1.2 Wiring the BAS-13
Page 12 and 13: AWID Readers 2.1.2 Wiring the BAS-1
Page 14 and 15: AWID Readers 2.3. AWID PROX with Ke
Page 18 and 19: AWID Readers 18 — revision 7
Page 20 and 21: BAI Barcode Readers 3.1.2 Wiring th
Page 22 and 23: Banque-Tec Readers 4.1.2 Wiring the
Page 24 and 25: Baran Tec Keypads Important: Make s
Page 26 and 27: Baran Tec Keypads 5.2. Barantec Eve
Page 28 and 29: Baran Tec Keypads 28 — revision 7
Page 30 and 31: Bewator Readers 6.1.2 Wiring the BA
Page 32 and 33: Casi-Rusco Prox Readers 7.1.2 Wirin
Page 34 and 35: Casi-Rusco Prox Readers Status Indi
Page 36 and 37: Ceia Readers 8.1.2 Wiring the BAS-1
Page 38 and 39: Checkpoint Systems Readers 9.1.2 Wi
Page 44 and 45: Deister Electronics 10.1.2 Wiring t
Page 46 and 47: Dorado Readers 11.1.2 Wiring the BA
Page 52 and 53: Dorado Readers 52 — revision 7
Page 54 and 55: Essex Keypads 12.1.2 Wiring the BAS
Page 56 and 57: Essex Keypads 12.2.2 Wiring the BAS
Page 58 and 59: HID Readers 13.1.2 Wiring the BAS-1
Page 60 and 61: HID Readers 13.3. HID MaxiProx 5370
Page 66 and 67:
HID Readers 13.6.2 Wiring the BAS-1
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
HID Readers 13.10.2 Wiring the BAS-
Page 76 and 77:
IDH Max Readers 76 — revision 7
Page 78 and 79:
ID Solutions Readers 15.1.2 Wiring
Page 80 and 81:
Infographics Readers 16.1.2 Wiring
Page 82 and 83:
Keri Systems Readers 17.1.2 Wiring
Page 84 and 85:
Magtek Readers 18.1.2 Wiring the BA
Page 86 and 87:
Mifare Readers 19.1.2 Wiring the BA
Page 88 and 89:
Mifare Readers 19.2.2 Wiring the BA
Page 90 and 91:
Mifare Readers 19.3. Iolan Reader M
Page 92 and 93:
Mifare Readers 92 — revision 7
Page 94 and 95:
Motorola Indala Readers 20.1.2 Wiri
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Motorola Indala Readers 20.7. Indal
Page 108 and 109:
Page 110 and 111:
Nedap Readers 21.1.2 Wiring the BAS
Page 112 and 113:
Nedap Readers a. for the ASCII Setu
Page 114 and 115:
Secura Key Readers 22.1.2 Wiring th
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Star Wiring Using APM10/11 120 —
Page 122 and 123:
Texas Instruments Readers 24.1.2 Wi
Page 124 and 125:
Index S Secura Key (e-Tag) prox rea
Page 126:
P.O. Box 5044 Indianapolis, IN 4625
show all

Alternative Reader Wiring Guide - Best Access Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?