Alternative Reader Wiring Guide - Best Access Systems
Alternative Reader Wiring Guide - Best Access Systems
Alternative Reader Wiring Guide - Best Access Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Essex Keypads<br />
12.2.2 <strong>Wiring</strong> the BAS-1320 (Single Wire LED Control)<br />
Dual <strong>Reader</strong><br />
Interface Module<br />
VO<br />
LED<br />
READER 1<br />
BZR<br />
D1/CLK<br />
D0/DATA<br />
Brown - LED wire<br />
Black - Ground<br />
Orange<br />
1 2<br />
3<br />
GND<br />
Red - Vcc<br />
White - Data 1<br />
4 5<br />
6<br />
VO<br />
Green - Data 0<br />
7 8<br />
9<br />
READER 2<br />
LED<br />
BZR<br />
D1/CLK<br />
Yellow - LED wire<br />
Tan - Case Ground<br />
Blue - CCTV<br />
∗ 0<br />
#<br />
D0/DATA<br />
GND<br />
SOFTWARE SETTINGS<br />
1. <strong>Reader</strong> Type = Wiegand/Prox<br />
2. Keypad Type = Eight bit output<br />
3. Jumper J4 must be set to 12 VDC<br />
4. Jumper J2 must be set to Unregulated<br />
Mode.<br />
5. 2-wire LED control<br />
Essex Keypad<br />
Part # KTP-163SN<br />
56 — revision 7