Alternative Reader Wiring Guide - Best Access Systems

More documents

Recommendations

Info

HID Readers 13.8.2 Wiring the BAS-1320 TYPICAL SOFTWARE SETTINGS 1. Reader Type = WIEGAND/PROX 2. Keypad = NO KEYPAD 3. LED Mode = 1 or 2-WIRE LED CONTROL Dual Reader Interface Module HID Red Orange Brown White Green Black VO LED BZR CLK/D1 DATA/D0 GND Reader 1 Tie to Earth Ground 13.9. iClass RK-40 The HID iClass RK-40 reader has an 8 bit keypad. It operates at 10-16 VDC. The average current draw is 72/244 mA at 12 V. The LEDs and buzzer function the same as standard HID Wiegand/Prox readers. Note: HID iClass readers must be unlocked with a special command card before they are operational with B.A.S.I.S. software. 70 — revision 7
Alternative Reader Wiring Guide 13.9.1 Wiring the BAS-1300 TYPICAL SOFTWARE SETTINGS 1. Reader Type = WIEGAND/PROX 2. Keypad = EIGHT BIT OUTPUT KEYPAD 3. LED Mode = 1 or 2-WIRE LED CONTROL Single Reader Inteface Module 1 2 3 4 5 6 7 * 8 0 9 # GND BZR LED CLK/D1 DATA/D0 VO Pin 2 (Ground) Pin 6 (Red LED) Pin 5 (Green LED) Pin 4 (Data 1) Pin 3 (Data 0) Pin 1 (+DC (10-16V) HID Tie to Earth Ground revision 7 — 71
Page 3 and 4:
Alternative Reader Wiring Guide Tab
Page 5 and 6:
Alternative Reader Wiring Guide 124
Page 7:
ACCESS READERS
Page 10 and 11:
AIT Readers 1.1.2 Wiring the BAS-13
Page 12 and 13:
AWID Readers 2.1.2 Wiring the BAS-1
Page 14 and 15:
AWID Readers 2.3. AWID PROX with Ke
Page 16 and 17:
AWID Readers 2.4. AWID Sentinel-Pro
Page 18 and 19:
AWID Readers 18 — revision 7
Page 20 and 21: BAI Barcode Readers 3.1.2 Wiring th
Page 22 and 23: Banque-Tec Readers 4.1.2 Wiring the
Page 24 and 25: Baran Tec Keypads Important: Make s
Page 26 and 27: Baran Tec Keypads 5.2. Barantec Eve
Page 28 and 29: Baran Tec Keypads 28 — revision 7
Page 30 and 31: Bewator Readers 6.1.2 Wiring the BA
Page 32 and 33: Casi-Rusco Prox Readers 7.1.2 Wirin
Page 34 and 35: Casi-Rusco Prox Readers Status Indi
Page 36 and 37: Ceia Readers 8.1.2 Wiring the BAS-1
Page 38 and 39: Checkpoint Systems Readers 9.1.2 Wi
Page 44 and 45: Deister Electronics 10.1.2 Wiring t
Page 46 and 47: Dorado Readers 11.1.2 Wiring the BA
Page 52 and 53: Dorado Readers 52 — revision 7
Page 54 and 55: Essex Keypads 12.1.2 Wiring the BAS
Page 56 and 57: Essex Keypads 12.2.2 Wiring the BAS
Page 58 and 59: HID Readers 13.1.2 Wiring the BAS-1
Page 60 and 61: HID Readers 13.3. HID MaxiProx 5370
Page 74 and 75: HID Readers 13.10.2 Wiring the BAS-
Page 76 and 77: IDH Max Readers 76 — revision 7
Page 78 and 79: ID Solutions Readers 15.1.2 Wiring
Page 80 and 81: Infographics Readers 16.1.2 Wiring
Page 82 and 83: Keri Systems Readers 17.1.2 Wiring
Page 84 and 85: Magtek Readers 18.1.2 Wiring the BA
Page 86 and 87: Mifare Readers 19.1.2 Wiring the BA
Page 88 and 89: Mifare Readers 19.2.2 Wiring the BA
Page 90 and 91: Mifare Readers 19.3. Iolan Reader M
Page 92 and 93: Mifare Readers 92 — revision 7
Page 94 and 95: Motorola Indala Readers 20.1.2 Wiri
Page 106 and 107: Motorola Indala Readers 20.7. Indal
Page 110 and 111: Nedap Readers 21.1.2 Wiring the BAS
Page 112 and 113: Nedap Readers a. for the ASCII Setu
Page 114 and 115: Secura Key Readers 22.1.2 Wiring th
Page 120 and 121:
Star Wiring Using APM10/11 120 —
Page 122 and 123:
Texas Instruments Readers 24.1.2 Wi
Page 124 and 125:
Index S Secura Key (e-Tag) prox rea
Page 126:
P.O. Box 5044 Indianapolis, IN 4625
show all

Alternative Reader Wiring Guide - Best Access Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?