Alternative Reader Wiring Guide - Best Access Systems
Alternative Reader Wiring Guide - Best Access Systems
Alternative Reader Wiring Guide - Best Access Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Alternative</strong> <strong>Reader</strong> <strong>Wiring</strong> <strong>Guide</strong><br />
13.8. iClass <strong>Reader</strong><br />
The HID iClass <strong>Reader</strong> (model numbers R10/R30/R40) operates at 10-16 VDC. The average current draw<br />
for the R10 is 65-122 mA; the R30: 80-260 mA; the R40: 80-260 mA. The LEDs and buzzer function the<br />
same as standard HID Wiegand/Prox readers.<br />
Note:<br />
HID iClass readers must be unlocked with a special command card before they are operational<br />
with B.A.S.I.S. software.<br />
13.8.1 <strong>Wiring</strong> the BAS-1300<br />
TYPICAL SOFTWARE SETTINGS<br />
1. <strong>Reader</strong> Type = WIEGAND/PROX<br />
2. Keypad = NO KEYPAD<br />
3. LED Mode = 1 or 2-WIRE LED CONTROL<br />
Single <strong>Reader</strong> Interface<br />
Module<br />
GND<br />
BZR<br />
LED<br />
CLK/D1<br />
DATA/D0<br />
VO<br />
Black<br />
Brown<br />
Orange<br />
White<br />
Green<br />
Red<br />
HID<br />
Tie to Earth<br />
Ground<br />
revision 7 — 69
![B.A.S.I.S. G Service Manual [T63300] - Best Access Systems](https://img.yumpu.com/48375082/1/190x245/basis-g-service-manual-t63300-best-access-systems.jpg?quality=85)
Change language