Alternative Reader Wiring Guide - Best Access Systems
Alternative Reader Wiring Guide - Best Access Systems
Alternative Reader Wiring Guide - Best Access Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Alternative</strong> <strong>Reader</strong> <strong>Wiring</strong> <strong>Guide</strong><br />
4. Banque-Tec <strong>Reader</strong>s<br />
4.1. Smart Card <strong>Reader</strong> (Models BT815 and BT900/818)<br />
The smart card reader operates at 12 VDC and communicates with a standard Wiegand output. It uses a<br />
single wire LED control. Follow the drawing below to connect the reader to the reader interface module.<br />
4.1.1 <strong>Wiring</strong> the BAS-1300<br />
Single <strong>Reader</strong> Inteface Module<br />
BANQUE-TEC<br />
GND<br />
BZR<br />
LED<br />
CLK/D1<br />
DATA/D0<br />
VO<br />
Black<br />
White<br />
Blue<br />
Green<br />
Yellow<br />
Red<br />
TYPICAL SOFTWARE SETTINGS<br />
1. <strong>Reader</strong> Type = WIEGAND/PROX<br />
2. Keypad = NO KEYPAD<br />
3. LED Mode = 1-WIRE LED CONTROL<br />
revision 7 — 21