Nokia N85

Make calls
124
The loudspeaker is active when you activate Video
sharing. If you do not want to use the loudspeaker for
the voice call while you share video, you can also use
a compatible headset.
Video sharing requirements
Video sharing requires a UMTS connection. For more
information on the service, UMTS network availability,
and fees associated with using this service, contact
your service provider.
To use video sharing you must do the following:
● Ensure that your device is set up for person-toperson
connections.
● Ensure you have an active UMTS connection and are
within UMTS network coverage. If you move outside
the UMTS network during a video sharing session,
the sharing stops while your voice call continues.
● Ensure that both the sender and recipient are
registered to the UMTS network. If you invite
someone to a sharing session and the recipient’s
device is not within UMTS network coverage, does
not have video sharing installed, or person-toperson
connections set up, the recipient does not
receive invitations. You receive an error message
that indicates that the recipient cannot accept the
invitation.
Settings
To set up video sharing, you need person-to-person
and UMTS connection settings.
Person-to-person connection settings
A person-to-person connection is also known as a
Session Initiation Protocol (SIP) connection. The SIP
profile settings must be configured in your device
before you can use video sharing. Ask your service
provider for the SIP profile settings, and save them in
your device. Your service provider may send you the
settings or give you a list of the needed parameters.
To add a SIP address to a contact card:
1. Press , and select Contacts.
2. Open the contact card (or start a new card for that
person).
3. Select Options > Add detail > Share video.
4. Enter the SIP address in the format
username@domainname (you can use an IP
address instead of a domain name).
If you do not know the SIP address for the contact,
you can use the phone number of the recipient,
including the country code, to share video (if
supported by the network service provider).
UMTS connection settings
To set up your UMTS connection: