Nokia N85
Nokia N85
Nokia N85
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Settings<br />
160<br />
not needed. In an ad hoc network, all devices must<br />
use the same WLAN network name.<br />
● WLAN security mode — Select the encryption<br />
used: WEP, 802.1x, orWPA/WPA2 (802.1x and<br />
WPA/WPA2 are not available for ad hoc networks).<br />
If you select Open network, no encryption is used.<br />
The WEP, 802.1x and WPA functions can be used only<br />
if the network supports them.<br />
● Homepage — Enter the web address of the starting<br />
page.<br />
● Use access point — Select After confirmation if<br />
you want the device to ask for confirmation before<br />
the connection using this access point is created or<br />
Automatically if you want the device to connect to<br />
the destination using this access point<br />
automatically.<br />
The available options may vary.<br />
Packet data settings<br />
Press , and select Tools > Settings ><br />
Connection > Packet data.<br />
The packet data settings affect all access points using<br />
a packet data connection.<br />
● Packet data connection — If you select When<br />
available and you are in a network that supports<br />
packet data, the device registers to the packet data<br />
network. Starting an active packet data connection<br />
(for example, to send and receive e-mail) is quicker.<br />
If there is no packet data coverage, the device<br />
periodically tries to establish a packet data<br />
connection. If you select When needed, the device<br />
uses a packet data connection only if you start an<br />
application or action that needs it.<br />
● Access point — The access point name is needed<br />
to use your device as a packet data modem to a<br />
compatible computer.<br />
● High speed packet access — Enable or disable the<br />
use of HSDPA (network service) in UMTS networks.<br />
Wireless LAN settings<br />
Press , and select Tools > Settings ><br />
Connection > Wireless LAN.<br />
● Show WLAN availability — Select whether is<br />
displayed in the standby mode when a wireless LAN<br />
is available.<br />
● Scan for networks — If you set Show WLAN<br />
availability to Yes, select how often the device<br />
searches for available wireless LANs and updates the<br />
indicator.<br />
To view advanced settings, select Options ><br />
Advanced settings. Changing wireless LAN advanced<br />
settings is not recommended.<br />
SIP settings<br />
Press , and select Tools > Settings ><br />
Connection > SIP settings.