Volume 6 – Geotechnical Manual, Site Investigation and Engineering ...

Chapter 7 RETAINING WALL
REFERENCES
[1] Bishop A.V and Henkel D.J., The Measurement of Soil Properties in the Triaxial Test,
E.Arnold, 1962.
[2] Bowles, J.E. Foundation Analysis and Design. (Fourth edition). McGraw-Hill International,
New York, 1992, 1004 p.
[3] Brown, R.W., (1996) Practical foundation Engineering Handbooks, Mcgraw-Hill
[4] BSI. Eurocode 7: Geotechnical Design – Part 1: General Rules (BS EN 1997-1 : 2004). British
Standards Institution, London, 2004, 117 p.
[5] Carter M. & Symons, M.V., Site Investigations and foundations Explained, Pentech Press,
London
[6] CGS, “Canadian Foundation Engineering Manual”, (Third edition). Canadian Geotechnical
Society, Ottawa, 1992, 512 p.
[7] Das, B.M., Principles of Geotechnical Engineering, PWK-Kent Publishing Company ,
Boston,MA., 1990
[8] Dept. of the Navy, Bureau of Yards and Docks, Washington D.C., NAVFAC DM-7.1, May
1982, Soil Mechanics
[9] Dept. of the Navy, Bureau of Yards and Docks, Washington D.C.,NAVFAC DM-7.2, May 1982,
Foundations and Earth Structures
[10] DID Malaysia, Geotechnical Guidelines for D.I.D. works
[11] DID Malaysia, Retaining Wall
[12] GCO (1990) Review of Design Method for Excavation, Geotechnical Control Office, Hong
Kong
[13] GEO (1993). Guide to Retaining Wall Design (Geoguide 1). (Second edition). Geotechnical
Engineering Office, Hong Kong, 217 p.
[14] Harry R.Cedergreen, Seepage, Drainage and Flownet, John Wiley nd Sons.
[15] Holtz, R.D., Kovacs, W.D. An Introduction to Geotechnical Engineering, Prentice-Hall, Inc.
New Jersey
[16] Ladd C.C., Foott R., Ishihara K., Schlosser F., and Roulos H.G., "Stress Deformation and
Strength Characteristics", State of the Art Report, Session I, IX ICSMFE, Tokyo, Vol. 2, 1971, pp. 421
- 494.
[17] Lambe T.W. and Whitman R.V., "Soil Mechanics", John Wiley 8: Sons, 1969
[18] McCarthy D.J., "Essentials of Soil Mechanics and Foundations".
[19] Nayak N. V. I II Foundation Design Manual. Dhanpat Rai a Sons I 1982.
7-38 March 2009