Volume 6 – Geotechnical Manual, Site Investigation and Engineering ...

Chapter 2 GEOTECHNICAL DESIGN PROCESS
REFERENCES
[1] Bowles, J.E. Foundation Analysis and Design. (Fourth edition). McGraw-Hill International,
New York, 1992, 1004 p.
[2] Brown, R.W., (1996) Practical foundation Engineering Handbooks, Mcgraw-Hill
[3] BSI. Eurocode 7: Geotechnical Design – Part 1: General Rules (BS EN 1997-1 : 2004). British
Standards Institution, London, 2004, 117 p.
[4] Carter M. & Symons, M.V., Site Investigations and foundations Explained, Pentech Press,
London
[5] CGS, Canadian Foundation Engineering Manual, (Third edition). Canadian Geotechnical
Society, Ottawa, 1992, 512 p.
[6] Das, B.M., Principles of Geotechnical Engineering, PWK-Kent Publishing Company ,
Boston,MA., 1990
[7] Dept. of the Navy, Bureau of Yards and Docks, Washington D.C., NAVFAC DM-7.1, May
1982, Soil Mechanics
[8] DID, Geotechnical Guidelines for D.I.D Works
[9] Holtz, R.D., Kovacs, W.D. An Introduction to Geotechnical Engineering, Prentice-Hall, Inc.
New Jersey
[10] Koerner R.M .• Construction and Geotechnical Method in Foundation Engineering, McGraw
Hill, 1985.
[11] Lambe T.W. and Whitman R.V., Soil Mechanics, John Wiley 8: Sons, 1969
[12] Peck R.B Hanson W.E. and Thornburn R.H., “Foundation Engineering", John Wiley and Sons,
1974.
[13] Smith C.N., Soil Mechanics for Civil and Mining Engineers.
[14] Teng W.C., Foundation Design, Prentice Hall, 1984.
[15] Terzaghi, K. & Peck, R.B. (1967). Soil Mechanics in Engineering Practice. (Second edition).
Wiley, New York, 729 p.
2-8 March 2009