Conceptual Master Plan - Emeryville Center of Community Life

CONCEPTUAL DESIGN January 9, 2009
Emeryville Center of Community Life
ARCHITECTURAL OUTLINE SPECIFICATIONS
Division 04000
Section 04100: Existing Pre-cast Wall Panels
1. Repair existing pre-cast concrete wall panels at existing gym and pool buildings as
required to match existing.
Section 04210: Brick Veneer
1. Provide and install precast thinset brick or terra cotta tile over 2 layers of cement
plaster underlayment at approximately 30% of the exterior elevations. Brick or tile is to
include manufactured corner pieces at all corners and recessed openings, and will
have tooled mortar joints between all pieces.
2. Texture, pattern, and color to be selected by architect from manufacturer’s standard
lines.
3. Provide premixed latex and waterproofing system recommended by manufacturer for
application of masonry veneer over exterior Portland cement base, and for grout as
specified.
Section 04300: Precast Elements
2. Assume precast trim at the building base and window sills, as well as at exposed
ground floor columns under the new gym building. Some coping may also be precast.
3. Precast elements to be provided by local manufacturers, in standard color.
Section 04855: Stone Coutertops
1. Provide and install recycled stone composite countertops as selected by architect at
main reception desks, and toilet room vanities.
Division 05000
Section 05600: Architectural Metal Fabrications
1. Downspout shoes to be cast iron, offset type, 4” diameter, 3’ high, Neenah Foundry
Company #R4926-G-1 or equal with manufacturer’s standard top and bottom
mounting brackets. Factory primed and field painted to match color on sheet metal
downspouts.
Outline Specifications- 37