Conceptual Master Plan - Emeryville Center of Community Life

CONCEPTUAL DESIGN January 9, 2009
Emeryville Center of Community Life
Roof – minimum R-30 – provide rigid insulation above metal roof decking at new gym
and multi-purpose room, foil faced batt insulation between framing members at other
areas.
Exterior walls - minimum R-19 –batt insulation
4. Provide 3-1/2” thick acoustical insulation batts in the interior walls separating toilet
rooms from adjacent spaces, and at all walls for activity rooms, offices, and other
sound sensitive spaces.
5. Provide 1” thick tectum panels, 8’ high by 8’ wide in a band around upper walls at all
four sides of the gymnasium.
6. No materials with formaldehyde content shall be utilized for this project.
Section 07270: Firestopping
1. Provide mineral wool batts for fire safing insulation where required at occupancy or area
separations.
Section 07412: Manufactured Metal Roofing
1. Pre-formed metal roofing system at gym and upper multi-purpose room roofs,
complete with anchoring assembly and accessory components for complete secure
installation. Berridge, AEP-span or equal. Color to conform with LEED cool roof
requirements.
2. Complete with integral shop finished flashing and sheet metal trim.
Section 07415: Manufactured Metal Wall Panels
1. Factory formed metal wall panel siding where indicated on exterior elevations,
including framing/anchorage assembly, and accessory components.
2. To be of not less than 22 gage galvanized steel, with Kynar 500 or equal factory
installed fluoropolymer finish. Color to be selected, smooth finish.
3. Include all related metal trim, including coping and ornamental trim at high walls.
Section 07500: Single-ply Roofing
1. Flat or low sloping roofs to be single-ply PVC with minimum reflectance and emissivity
as required for LEED reflective roof credit. Tremco or equivalent.
2. Installation as recommended by manufacturer over approved substrate.
Outline Specifications- 40