Conceptual Master Plan - Emeryville Center of Community Life

CONCEPTUAL DESIGN January 9, 2009
Emeryville Center of Community Life
c. Termination Hardware (Data Jack):
(1). Cable termination hardware shall be individual Category 6 rated
jacks.
d. Termination hardware (Equipment Rooms):
(1). All cables installed for data application shall be terminated in
accordance with Category 6 requirements.
e. Equipment Racks:
(1). Open bay relay type racks shall be specified in sufficient quantity to
provide adequate mounting space for patch panels, wire managers,
network integrating equipment and active devices (by others), plus
an additional 25% growth.
(2). Equipment racks shall be supported or braced at the top of each
rack by a length of unistrut. Unistrut shall be attached to a full
height wall by the appropriate fastening hardware. Equipment racks
shall have the following physical characteristics:
(a).
(b).
(c).
Self-supporting, manufactured of either aluminum or steel,
floor mounted.
Both sides of vertical channel drilled and tapped for equipment
mounting.
Finish shall be either mill (aluminum) or telephone gray in
color.
f. Patch Panels and Wire Managers:
(1). Data patch panels specified should be discrete port-type designed
to accept the devices described above. The manufacturer as
suitable for 155 Mbps data transmission shall certify Patch panels.
Patch panels shall be manufactured of aluminum or steel, having
the required ports per panel.
(2). Wire management hardware shall be installed at both the top and
bottom and between each patch panel and along the sides of the
rack for patch cable routing and management.
g. Voice/data jacks shall be provided throughout the facility. All wall plates
shall be 6 port plates with blanks placed in unused ports.
Outline Specifications- 76