Volume 2 - Atomic Energy Regulatory Board
Volume 2 - Atomic Energy Regulatory Board
Volume 2 - Atomic Energy Regulatory Board
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
A.2.1<br />
A.2.2<br />
A.3.<br />
A.3.1<br />
(a)<br />
(b)<br />
(c)<br />
Ensuring that construction and installation work is carried out in<br />
accordance with design specifications, drawings, procedures and<br />
instructions, including the implementation of specified QA<br />
requirements.<br />
Ensuring that construction and installation work undertaken,<br />
including work by manufacturers/suppliers, is coordinated, conducted<br />
and completed in accordance with planned programmes.<br />
Controlling access to the construction site.<br />
Appropriate controls reflecting safety regulations shall be established for all<br />
personnel, including suppliers and visitors. These shall be in line with<br />
applicable statutes and shall include arrangements for effective planning,<br />
organisation, monitoring and review of the preventive and protective<br />
measures. Management shall provide all necessary support to the contractor<br />
to ensure health and safety of the construction personnel and quality assurance<br />
requirements of construction.<br />
Grading<br />
A graded approach based on the relative importance to safety of each item,<br />
service or process should be adopted. Activities, which should be graded<br />
during construction include:<br />
(a)<br />
(b)<br />
(c)<br />
(d)<br />
(e)<br />
Interfaces<br />
Qualification of special construction processes and the personnel to<br />
carry them out<br />
Details and need for inspection plans<br />
Level of traceability of construction material and related records<br />
Level of in-process controls and need for hold points<br />
Complexity involved in equipment handling/erection and posterection<br />
preservation.<br />
Employer/Licensee should ensure that interface arrangements shall be agreed<br />
among the construction agencies, suppliers and other organisational units<br />
performing the work. These should be defined in writing and be included in<br />
relevant documents. Appropriate references of the same should be made in<br />
the QA programme. Handover/transfer responsibilities after completion of<br />
construction/installation to operating organisation.<br />
PERFORMANCE FUNCTIONS<br />
Document Control<br />
Procedures for the preparation, review, approval, issue, modification and<br />
191
Change language