HP Officejet 4500 (G510) - static.highspeedb...
HP Officejet 4500 (G510) - static.highspeedb...
HP Officejet 4500 (G510) - static.highspeedb...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
This section contains the following topics:<br />
• Set link speed<br />
• To View IP settings<br />
• To Change IP settings<br />
Set link speed<br />
You can change the speed at which data is transmitted over the network. The default is<br />
Automatic.<br />
1. Press the Setup button.<br />
2. Press the arrow keys until Network is highlighted, then press OK.<br />
3. Select Advanced Setup, then select Link Speed.<br />
4. Press the number next to the link speed that matches your network hardware:<br />
• 1. Automatic<br />
• 2. 10-Full<br />
• 3. 10-Half<br />
• 4. 100-Full<br />
• 5. 100-Half<br />
To View IP settings<br />
To view the IP address of the device:<br />
• Print the network configuration page. For more information, see Understand the network<br />
configuration page (some models only).<br />
• Or, open the Network Toolbox (Windows), click the Network Settings tab, click the Wired or<br />
Wireless tab (depending on the current connection), and then click IP Settings.<br />
To Change IP settings<br />
The default IP setting for the IP settings is Automatic, which sets the IP settings automatically.<br />
However, if you are an advanced user, you might want to manually change, such as the IP address,<br />
subnet mask, or the default gateway.<br />
CAUTION: Be careful when manually assigning an IP address. If you enter an invalid IP<br />
address during the installation, your network components will not be able to connect with the<br />
device.<br />
1. Press the Setup button.<br />
2. Press the arrow keys until Network is highlighted, and then press OK.<br />
3. Select Advanced Setup, select IP Settings, and then select Manual IP Settings.<br />
4. Press the number next to the IP setting:<br />
• 1. IP Address<br />
• 2. Subnet Mask<br />
• 3. Default Gateway<br />
5. Enter your changes, and then press OK.<br />
Change advanced network settings 199