HP Officejet 4500 (G510) - static.highspeedb...
HP Officejet 4500 (G510) - static.highspeedb...
HP Officejet 4500 (G510) - static.highspeedb...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 5<br />
Set the dial type<br />
you are trying to send a fax to another country/region or receive a fax from another<br />
country/region, or if you are using a satellite phone connection.<br />
To set the fax error-correction mode<br />
1. Press Setup.<br />
2. Press right arrow to select Fax Settings, and then press OK.<br />
3. Press right arrow to select Error Correction, and then press OK.<br />
4. Press right arrow to select On or Off, and then press OK.<br />
Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is<br />
Tone. Do not change the setting unless you know that your phone line cannot use tone<br />
dialing.<br />
NOTE: The pulse-dialing option is not available in all countries/regions.<br />
To set the dial type<br />
1. Press Setup.<br />
2. Press right arrow to select Basic Settings, and then press OK.<br />
3. Press right arrow to select Tone or Pulse, and then press OK.<br />
4. Press right arrow to select the appropriate option, and then press OK.<br />
Set the redial options<br />
If the device was unable to send a fax because the receiving fax machine did not answer<br />
or was busy, the device attempts to redial based on the settings for the busy-redial and<br />
no-answer-redial options. Use the following procedure to turn the options on or off.<br />
• Busy redial: If this option is turned on, the device redials automatically if it receives<br />
a busy signal. The factory-set default for this option is ON.<br />
• No answer redial: If this option is turned on, the device redials automatically if the<br />
receiving fax machine does not answer. The factory-set default for this option is<br />
OFF.<br />
Set the fax speed<br />
54 Fax<br />
To set the redial options<br />
1. Press Setup.<br />
2. Press right arrow to select Fax Settings, and then press OK.<br />
3. Press right arrow to select Redial Options, and then press OK.<br />
4. Press right arrow to select the appropriate Busy Redial or No Answer Redial<br />
options, and then press OK.<br />
You can set the fax speed used to communicate between your device and other fax<br />
machines when sending and receiving faxes.