IP 55 Modular Cabinets

AFO SERIES - HORIZONTAL SINGLE PIECE CABINET
WITH DOUBLE DOOR AND REAR PANEL
AFO SERIES – HORIZONTAL SINGLE PIECE CABINET WITH DOUBLE DOOR AND REAR PANEL
W
“AFO” SINGLE PIECE CABINET, COMPLETE WITH:
H
- Bearing structure in press bent, pre-bored sheet metal
sections, completely welded;
- Fixed bottom with cable input compartment and the
relative closure plate;
- Blind front doors with rabbets and 120° aperture;
- Screw-on rear panel(s);
- Electromechanical plate.
D
F
R
Nominal Dimensions
X
Additional components:
- Eyebolts (see pag. 140);
- 100 or H=200 mm H base.
Y
Fig. 94.1
NOTE:
- Cabinets 1600 mm wide and greater have two screw
on rear panels;
- The measurements and codes of front doors, rear panels
and electromechanical plates are shown, respectively, on
pages 19-22 and 25;
- The cable compartments are shown on page; 95;
Plate Characteristics
code H W D F Door Code Rear panel code X Y
AFO061404 600 1400 400 346 DBE0614 RPE0614 1290 480
BOZZA DI STAMPA
AFO081404 800 1400 400 346 DBE0814 RPE0814 1290 680
AFO061604 600 1600 400 346 DBE0616 RPE0616 1490 480
AFO081604 800 1600 400 346 DBE0816 RPE0816 1490 680
AFO101604 1000 1600 400 346 DBE1016 RPE1016 1490 880
AFO081804 800 1800 400 346 DBE0818 RPE0818 1690 680
AFO101804 1000 1800 400 346 DBE1018 RPE1018 1690 880
AFO082004 800 2000 400 346 DBE0820 RPE0820 1890 680
AFO102004 1000 2000 400 346 DBE1020 RPE1020 1890 880
Dimensions in mm
94
21 CATALOGUE