IP 55 Modular Cabinets

Fig. 146.1
Fig. 146.2
Fig. 146.3
TPS..X
TPP..Z
TPS..X
Upper crosspiece for
attachment of AX
and AF plate.
Attached between
the horizontal front
and rear struts.
Serves the purpose
of positioning and
attaching the
STX100 bracket between
the crosspiece
and the plate. The
code depends on the
depth of the cabinet.
TPP..Z
Lower AZ plate support
crosspiece.
Attached between
the horizontal front
and rear struts.
Used as a support
for the plate and its
attachment in the
desired position in
depth.
The code depends on
the depth.
ZCN100
This is used prevalently on
ST box cabinets.
It is attached in pairs and at
the sides of the lower part
of the door to hook onto the
lower border of the box
cabinet and with its lateral
fins to centre it horizontally.
ZCN100 Closure of the door is
through the box positioned
in the upper part of the door.
This system avoids placing a hinge on the door and therefore it
can be completely removed from the box cabinet.
ACCESSORIES - AUXILIARY BRACKETS,
COMPONENTS BELONGING TO VARIOUS KITS
CODE
Width of
cabinet
W
Characteristic dimensions
Peff
TPS40X 400 332
TPS50X 500 432
TPS60X 600 532
TPS80X 800 732
TPSA0X 1000 932
TPSC0X 1200 1132
Dimensions in mm
CODE
Width of
cabinet
W
Characteristic dimensions
Peff
TPP40Z 400 209
TPP50Z 500 309
TPP60Z 600 409
TPP80Z 800 609
TPPA0Z 1000 809
TPPC0Z 1200 1009
Dimensions in mm
Fig. 146.4
BOZZA DI STAMPA
146
21 CATALOGUE