IP 55 Modular Cabinets
IP 55 Modular Cabinets
IP 55 Modular Cabinets
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The AZ Series cabins, designed and built with a completely<br />
innovative structure have asserted themselves as being<br />
synonymous with “total safety”. The construction characteristics<br />
were carefully researched from the technical and functional<br />
standpoints, to guarantee the greatest possible<br />
degree of robustness, security, modularity and aesthetic<br />
finishing – all of which are indispensable requirements today<br />
in order to respond to national and international market<br />
demands. The AZ Series cabinets are equipped with a perimeter<br />
frame with structural sections in 2 mm thick sheet<br />
steel, with eight bends and closing panels on all surfaces<br />
(side, top and bottom) which guarantee easy accessibility of<br />
equipment housed inside the cabinet and total protection<br />
from water and dust. The completely robot-welded structural<br />
sections confer precision, robustness and simplicity,<br />
which are evident, above all, in coupling several modules.<br />
The painting cycle is performed by continuous cycle plants,<br />
following degreasing, phosphation with iron phosphates and<br />
rinsing. The pieces are then kiln-dried, after which the painting<br />
is performed by robots in automatic cabins and finished<br />
manually in the most difficult points. Thermal hardening<br />
epoxy polyester type powders are used for the painting.<br />
The totally automatic production cycle guarantees the<br />
utmost homogeneity and constant quality over the long<br />
term.<br />
AZ Series – <strong>IP</strong> <strong>55</strong> <strong>Modular</strong> <strong>Cabinets</strong><br />
AZ CABINET COMPONENTS<br />
The bearing perimetral structure is built from 2 mm thick<br />
sheet steel sections, completely welded to guarantee excellent<br />
mechanical robustness.<br />
The rear panel in 2 mm thick press bent sheet steel, the<br />
internal reinforcing frame and the centring bores, which<br />
facilitate attachment with 6 or 8 M6 screws, are equipped<br />
with a polyurethane perimetral gasket that adapts perfectly<br />
to the structure.<br />
The side panels in 1.5 mm thick press bent sheet steel and<br />
the centring bores that facilitate attachment with 6 M6<br />
screws are equipped with a perimetral polyurethane gasket.<br />
The top and bottom of the cabinet are removable and are<br />
realised in 1.5 mm thick press bent sheet steel and the centring<br />
bores that facilitate attachment with 4 or 6 M6<br />
screws are equipped with a polyurethane perimetral gasket<br />
that adapts perfectly to the structure. The bottom is equipped<br />
with holes for cable passage and the relative covers<br />
with gaskets.<br />
BOZZA DI STAMPA<br />
Fig. 56.1<br />
56<br />
21 CATALOGUE