IP 55 Modular Cabinets

AXD, AZD - Internal modular elements
INTERNAL MODULAR FRAME WITH UPPER AND LOWER COMPENSATION PANELS
126
B
C
N
Fig. 45.1
WIRING ACCESSORIES; CROSS PIECES FOR ATTACHMENT OF DIN BAR
WIRING ACCESSORIES; DIN BAR, CODES AND DIMENSIONS
C
Fig. 45.2
74
With reference to page 42 (Fig. 42.3), the modular
part making up the internal frame is highlighted. The
frame is supplied with the upper and lower compensation
panels, so that a height N remains, where the
customised modular panels are placed.
Either screw-on or hinged panels may be used, indifferently,
both on the right and left sides.
The back of the cabinet is designed for the attachment
of the component plate, where the lateral slots have
been cut to permit adjustment of the position in depth.
CODES AND CHARACTERISTIC DIMENSIONS
Nominal
Dimensions
Characteristic Dimensions
CODE H W B C N
TMI166 1600 600 440 465 1400
TMI168 1600 800 640 665 1400
TMI186 1800 600 440 465 1600
TMI188 1800 800 640 665 1600
TMI206 2000 600 440 465 1800
TMI208 2000 800 640 665 1800
TMI226 2200 600 440 465 2000
TMI228 2200 800 640 665 2000
Dimensions in mm
CODES AND DIMENSIONS
Width of cabinet
Characteristic Dimensions
CODE W A
MTZ600 600 290 DIN W=600
MTZ800 800 490 DIN W=800
Dimensions in mm
BOZZA DI STAMPA
25
ø6,3
Width of cabinet Characteristic Dimensions
CODE W A
15
35
A
CPP344 300 170 DIN W=170
CPP444 400 270 DIN W=270
CPP544 500 370 DIN W=370
CPP644 600 490 DIN W=490
CPP844 800 690 DIN W=690
Dimensions in mm
21 CATALOGUE
45