IP 55 Modular Cabinets

AXD, AZD - External modular elements
E
F
4 REDUCED HORIZONTAL PARTITIONS - Codes and dimensions
THE HORIZONTAL PARTITIONS are screwed to the vertical partitions in
correspondence with the crosspiece rabbet; when the door is open, it
is not possible to access the sections above and below the cell. The
slots permit natural circulation of air.
Nominal Dimensions Characteristic Dimensions
E
I
G
Fig. 47.1
Fig. 47.2
Fig. 47.3
CODE W E F
SOA602 600 542 200
SOA802 800 742 200
SOAA02 1000 942 200
5 REDUCED VERTICAL PARTITIONS - Codes and dimensions
THE REDUCED VERTICAL PARTITIONS are supplied in pairs, equipped
with a special boring pitch that permits attachment of the
horizontal shelves and reduced height plates, so that it is possible
to segregate the switch cells.
Nominal Dimensions Characteristic Dimensions
CODE H G I
SVX182 1800 1796 200
SVX202 2000 1996 200
SVX222 2200 2196 200
SVZ182 1800 1796 200
SVZ202 2000 1996 200
SVZ222 2200 2196 200
Both the horizontal and vertical partitions are indicated as having
a depth of 200 mm. This is considered a standard depth (the purpose
of this choice is mainly to arrive at an average list price),
but in most cases this position is at the discretion of the customer
and is therefore subject to evaluation on a case-by-case
basis.
6 DOOR CROSSPIECE RABBET - Codes and dimensions
THE DOOR CROSSPIECE RABBET is placed between two reduced
height doors to conserve the IP 55 level of protection, adhering
to the polyurethane gasket glued to the doors.
BOZZA DI STAMPA
Nominal Dimensions Characteristic Dimensions
CODE W E Altezza
TBP600 600 530 36
TBP800 800 730 36
TBPA00 1000 930 36
36
21 CATALOGUE
47