IP 55 Modular Cabinets

RLZ - LATERAL RACEWAY
C
W
The purpose of the RLZ Lateral Cable Raceway cabinet is to
make it possible to place a cabinet in line with a side door,
obtaining a space for a cable raceway and complementary
equipment. The structure is monolithic, which means that it
has no dismountable front and rear panels; a portion of one
side is designed for open coupling with the side of the AZ
cabinet and the other side has a door. Similar to the AZ
cabinets, the door may be opened towards the left or right.
On the side designed for coupling with the AZ cabinet, a
blind electro mechanical plate can be installed, which may
also be supplied pre-bored, on request.
Level of protection IP 55.
RLZ RACEWAY COMPONENTS:
- Press bent monolithic bearing structure;
- Blind roof;
- Bottom equipped with cable entry and relative over plate;
- Side door with lever bolt hinge closure and reinforcing
frame (aperture 120°);
- Lateral component support plate.
Additional components:
- 100 mm or 200 mm H base
- Customised borings on plate, on request.
BOZZA DI STAMPA
H
F
D
E
M
G
Fig. 76.1 Fig. 76.2
21 CATALOGUE
76