IP 55 Modular Cabinets

ACCESSORIES - SCREWS, NUTS AND BOLTS
DIF17
DIF22
DIU37
DGM600- DGM800
Fig. 153.1
Fig. 153.3
Fig. 153.4
SCREWS
A vast array of screws, nuts and bolts in
cages are available. In particular, the cage
nuts for external use (DGM900 and
DGM908, can be easily inserted in the 15 x
9 rectangular bores on the outside of the vertical
shafts and cross pieces. All of the nuts
and bolts are made of galvanised steel. The
screws illustrated, with the exception of the
cage nuts indicated for the purpose of facilitating
identification, are specific to
Quadritalia’s production.
VTM912
SCREWS - LIST OF CODES, DESCRIPTION AND QUANTITY
DGM900- DGM908
VTR506
Fig. 153.2
CODE
Characteristics of supply
N° of
Pieces
DDM500 Nut M5 w/flanges 100
DDM600 Nut M6 w/flanges 100
DDM800 Nut M8 w/flanges 100
DGM600 Cage nut for inside use M6 100
DGM800 Cage nut for external use M8 100
DGM900 Cage nut for external use M6 100
DGM908 Dado a gabbia per esterno M8 100
VTR500 Flared head Phillips screws M5x12 100
VTR506 Screws for tubular doorframe 1
VTR510 Self-tapping tri-lobe screws M5x8 100
VTR600 Screws with flanges M6x8 hexagonal head 100
VTR616 Screw with flanges TE M6x16 100
VTR800 Screws with flanges M8x16 hexagonal head 100
VTR610 Embedded hexagonal flare head screw M6x12 100
VTM900 Phillips head screw M6x14 100
VTM912 Special M6x50 screw for head of base 1
VTD600 Flanged screw TE M6x8 and flanged nut M6 100
VTD616 Flanged screw TE M6x16 and flanged nut M6 100
VTD800 Flanged screw TE M8x16 and flanged nut M8 100
DIF17 Spacer for side panel H=18 (female to female) 1
DIR22 Spacer for back panel H=23 (female to female) 1
DIU37 Joint spacer M6, H=38 (male to male) 1
BOZZA DI STAMPA
Fig. 153.5
Fig. 153.6
Fig. 153.7
21 CATALOGUE
153