IP 55 Modular Cabinets

AXN - PC COLUMN
Today’s industrial production is entirely controlled by computer;
the AXN column adapts in a completely rational manner
to this type of management. The commands for control and
keyboard data input originate from this cabinet, which is
integrated by visualisation on the monitor and printouts from
the printer.
The cabinet is made up of a door with and observation window
in the upper part, to enable workers to see the monitor
(with the possibility of entering data in the lower part of the
door through a floppy disk slot – see fig. 36.3), a drawer on
slides with a tip-down door for the keyboard and mouse in
the middle and, in the lower part, a blind door that allows
access, for the optional housing of a printer carriage, shelves
for other equipment or a plate that can be up to 850 mm
high (fig. 36.3).
Fig. 36.1 Fig. 36.2
BOZZA DI STAMPA
COMPONENTS OF THE BASIC CABINET
- AX type bearing structure;
- Upper door that opens 120°, with 19” window, complet
with lever bolt closure (aperture may be increased to 180°
on request
- Keyboard drawer;
- Blind lower door, opens 120°, complete with lever bolt
closure (optional opening 180°);
- Screw on rear panel;
- Two horizontal shelves for monitor and keyboard protection. Fig. 36.3
36
21 CATALOGUE