IP 55 Modular Cabinets

ACCESSORIES - RGS: WHEEL SUPPORTS,
RGF AND RGO SWIVEL AND FIXED WHEELS
RGS - EXAMPLE OF APPLICATION
In Fig. 141.1 an example of application of the wheel support is shown. The support
is hooked to the corner of the base, as indicated, and then attached to the lower bore
of the corner. The width of the support is 120 mm, while the depth is 100 mm. The
overall displacement of the base is therefore 200 mm in depth, while the width
remains within the base.
The capacity of the support is suitable for the capacity indicated for the swivel or
fixed wheels.
RGF, RGO - LIGHT WHEELS
Fig. 151.2
Fig. 151.4
RGO060
RGF060/Q
RGF 060 - RGO 060
Small wheels (diameter 60 mm, width 24
mm, height from ground 85 mm) in plastic
material are suitable for the movement of
small cabinets. The movement of the wheels
takes place through a bushing. Wheels may
be oriented and equipped with an M12 threaded
tang (RGO 060) or with a plate (RGO
060 / Q and RGF 060 / Q). In both versions
the wheel can be equipped with a brake (i.e.:
RGF 060 / F). The support in galvanised sheet
metal can accommodate loads up to a maximum
of 50 Kg.
Fig. 151.1
RGO060/Q
RGO060/F
Fig. 151.5 Fig. 151.5
Fig. 151.3
BOZZA DI STAMPA
CODE
Type of wheel
Description
Maximum
capacity N
Characteristic dimensions
Height from
ground
Plate and tang
dimensions
RGO060 Orientable wheel ø60 pin M10 490 85 M10x25
RGO060/Q Orientable wheel ø60 plate support 490 85 60x50
RGF060/Q Fixed wheel ø60 plate support 490 85 60x50
RGO060/F Swivel wheel ø60, threaded pin. M10 and brake 490 85 M10x25
RGO060/QF Swivel wheel ø60, with plate and brake 490 85 60x50
RGF060/QF Fixed wheel ø60, with plate and brake 490 85 60x50
Fig. 151.6
Dimensions in mm
21 CATALOGUE
151