IP 55 Modular Cabinets

AF SERIES - IP 55 MODULAR CABINETS
The primary characteristic of the AF series cabinets is the
monoblock frame: the bottom, roof and pre-bored electro
welded sides in press bent sheet steel. Access to the cabinet
is provided through the front and rear, where a door and
rear panel are installed, or both a front and rear door. Along
the entire perimeter of the inside, there is the usual boring
with the step for attachment of components. The door and
rear panels are the same ones used in the AX and AZ
series. On the bottom of the monoblock there is an opening
for the passage of cables, with a panel for closure.
In addition to the basic configuration, it is also possible to
order the following configurations:
AFB – Blind external door;
AFV – Transparent external door and blind internal door;
AFD – Transparent external door and frame with modular
internal panels.
BOZZA DI STAMPA
Fig. 86.1
86
21 CATALOGUE