IP 55 Modular Cabinets

AS SERIES – SINGLE PIECE FRAME
“AS” SINGLE PIECE FRAME, COMPLETE WITH:
W
I
G
D
- Single piece bearing structure;
- Fixed bottom with cable input compartment and the relative
closure plate;
- Pre-bored to accommodate eyebolts, base and attachment
components to complete cabinet.
H
F
Fig. 97.1
Nominal Dimensions
Additional components:
- Hinged and reversible front door with 120° aperture;
- 100 or 200 mm H base;
- Internal electro mechanical plate.
NOTE:
- Since the cabinet is completely closed on five sides, it is
accessible only from the door;
- The following features may be customised on request:
- Side bores;
- Roof bores.
- For the door see page 19 (DBE);
- For the door see page 25 (PNA...);
- For the cable input compartment, see page 95.
Characteristics
code H W D F G I S T
AS1264 1200 600 400 373 311 528 501 1111
AS1284 1200 800 400 373 311 728 701 1111
AS1462 1400 600 200 173 111 528 501 1311
AS1464 1400 600 400 373 311 528 501 1311
AS1484 1400 800 400 373 311 728 701 1311
AS1662 1600 600 200 173 111 528 501 1511
AS1664 1600 600 400 373 311 528 501 1511
AS1684 1600 800 400 373 311 728 701 1511
AS1686 1600 800 600 573 511 728 701 1511
AS1864 1800 600 400 373 311 528 501 1711
AS1884 1800 800 400 373 311 728 701 1711
AS1886 1800 800 600 573 511 728 701 1711
AS2084 2000 800 400 373 311 728 701 1911
AS2086 2000 800 600 573 511 728 701 1911
AS20A4 2000 1000 400 373 311 928 901 1911
AS20A6 2000 1000 600 573 511 928 901 1911
Dimensions in mm
S
T
BOZZA DI STAMPA
21 CATALOGUE
97