IP 55 Modular Cabinets

ACCESSORIES - AUXILIARY BRACKETS,
COMPONENTS BELONGING TO VARIOUS KITS
The brackets and crosspieces are shown below as auxiliaries and are part of the components of the various assembly kits. They are
generally not supplied separately, but it is deemed opportune to list them in the event a kit is incomplete and there is a need to identify
a missing piece.
Fig. 145.1
STZ100
STZ101
STX100
Corner bracket in universal version
designed for upper attachment of
the electromechanical plates of AX
and AF cabinets. Also used for
other types of cabinets where attachment
of the plate is performed in
a manner similar to the AX cabinet.
STZ100 and STZ101
Right and Left version brackets,
included in the AZ cabinet plate
attachment kit. Designed for the
upper attachment of the electromechanical
plate:
- Right bracket code STZ100;
- Left bracket code STZ101.
Fig. 145.3
STX100
Fig. 145.5 STXZ02
Cabinet battery joining
plate in rear-to-rear
direction.
Assembled in corners
between vertical and
Fig. 145.6
horizontal struts, to
strengthen the connection
between cabinets in
the direction of depth.
STXZ02
Fig. 145.7
TPP..X
TPP..X
Lower AX and AF
plate support.
Attached between
the horizontal front
and rear struts.
Used as a support
for the plate and its
attachment in the
desired position in
depth.
The code depends on
the depth.
Fig. 145.2
STXZ01
Plate for joining of
AX and AZ cabinets
in batteries. These
plates connect the
vertical struts laterally,
in the direction
of cabinet width.
SQZ400
SQZ380
Fig. 145.4
SQZ380
Corner bracket in
single version designed
for upper attachment
of the electromechanical
plates
of AS cabinets and
consoles.
Also used for combined
attachment of
STA and STF
SQZ380 sections
STXZ01
SQZ400
Universal corner bracket
designed for upper attachment
of the electromechanical
plates of LAS cabinets
and consoles. On one side the
M8 bore is threaded, while it
is smooth with ø 8 on the
other side.
BOZZA DI STAMPA
CODE
Width of
cabinet
W
Characteristic dimensions
Peff
TPP40X 400 332
TPP50X 500 432
TPP60X 600 532
TPP80X 800 732
TPPA0X 1000 932
TPPC0X 1200 1132
Dimensions in mm
21 CATALOGUE
145