IP 55 Modular Cabinets

SFM, STTP - WALL AND RAIN PROTECTION ROOF
HOOKS FOR IP 65 AIRTIGHT BOX CABINETS
11
SFM400 - WALL HOOK KIT FOR BOX CABINET
35
73
47
CODE
Nominal Dimensions
W
Characteristics
SFM400 for all assembly kit
20
20
Outside rear part
of box cabinet
Fig. 110.1
Fig. 110.2
Wall application kit (SFM400)
- 4 ea. Galvanised supports;
- 4 ea. M6 TEFR screws;
- 4 ea. Airtight gaskets;
- 4 ea. M6 elastic lodging cage.
NOTE:
STTP - STB CABINET RAINPROOF ROOF, Codes and characteristic dimensions
N
D
70
M
W
The hook is mounted on the rear of the cabinet in either
the horizontal or vertical position. The bore in the rear of
the box cabinet is the same distance from the upper and
side borders (see Fig. 110.2). The assembly plan is shown
in the figure. First it is inserted in the bore of the M6 elastic
cage lodging and then the gasket, hook (in the vertical
or horizontal position) are tightened with the M6 TEFR
screws. Avoid tightening the screws excessively to avoid
breaking the elastic lodging (max. torque 8 Nm).
Nominal Dimensions
Characteristics
CODE W D M N
BOZZA DI STAMPA
ST3020TP 300 200 396 296
ST4020TP 400 200 496 296
ST4025TP 400 250 496 346
ST5020TP 500 200 596 296
ST5025TP 500 250 596 346
ST6020TP 600 200 696 296
ST6025TP 600 250 696 346
ST6030TP 600 300 696 396
ST8025TP 800 250 896 346
ST8030TP 800 300 896 396
Rainproof roof support
brackets (4 x)
Fig. 110.3
Dimensions in mm
21 CATALOGUE
110