IP 55 Modular Cabinets

KAP100, AZ PLATE BACKSPACING KIT
The front plate (see page 25) is generally mounted on crosspieces,
but as stated, if it is desired to have the maximum
possible distance between the door and the surface of the
plate, it can be placed between the rear struts. Remember
that in this case the internal distance between the door and
the plate surface amounts to the nominal depth measurement,
decreased by about 96 mm.
In order to make this type of assembly possible, a kit has
been designed, called the plate backspacing kit, which is
made up of two compact upper support brackets (A) suitable
for attachment in the small space between the upper
part of the plate and the bored side, along with the usual
components of the lower part of the cabinet.
Fig. 69.2
Fig. 69.3
Rif. fig.69.2
BOZZA DI STAMPA
Rif. fig.69.3
PLATE BACKSPACING KIT (KAP100):
Fig. 69.1
CODES AND COMPOSITION OF THE KIT
Nominal Dimensions Characteristics
code
H x W
KAP100 All Assembly Kit
2 ea, Upper support brackets (SQZ380);
2 ea. TE F.R. screws M8x16;
2 ea. M6x16 TT screws;
4 ea. M6 cage nuts for interior;
2 ea. Plate attachment pins;
2 ea. Plate slide stoppers.
2 ea. Flanged M8 nuts;
21 CATALOGUE
69